The LK1
Technical Specs LK1 2020
- The LK1 comes from our "R&D" program and has been designed to be very accessible for levels rider but also to perform in all conditions.
- It is Always made exclusively in France in our factory in Saint-Malo.
- The complete set of wings fits to all conditions, all programs (freeride, up-wind / down-wind, slalom ...) and all riders.
2 Mast LK1
-
- Inside our Factory, Lokefoil developped this Mast to have the best compromise accessibility/performances.
- A simple and evolutive foil thanks to his complete range of front wing and staibilizer.
- Program :
- Program : race, freerace, freeride.
- Wings compatibility : ALL LK1 wing.
- Monobloc : One piece mast/fuselage : This link makes it super stiff , avoid nesting and makes it strong over the years.
- Weight : is optimised thank’s to it special construction and layup, made in aluminum mold.
- LTS: plate on the hull of the board garanties the perfect angle between the foil and the board.
- Inox insert : The inox insert A4 of the wing are directly mold in the piece.
- BOX : tuttle, deeptuttle
- Specification :
- Dimensions : Mast length : 92cm, fuselage length :84cm
- Material : carbone HR
- Decoration : stickers
-
- Inside our Factory, Lokefoil developped this Mast to have the best compromise accessibility/performances.
- A simple and evolutive foil thanks to his complete range of front wing and staibilizer.
- Program :
- Program : race, freerace, freeride.
- Wings compatibility : ALL LK1 wing.
- Monobloc : One piece mast/fuselage : This link makes it super stiff , avoid nesting and makes it strong over the years.
- Weight : is optimised thank’s to it special construction and layup, made in aluminum mold.
- LTS: plate on the hull of the board garanties the perfect angle between the foil and the board.
- Inox insert : The inox insert A4 of the wing are directly mold in the piece.
- BOX : tuttle, deeptuttle
- Specification :
- Dimensions : Mast length : 92cm, fuselage length :84cm
- Material : carbone HM
- Decoration : integreted
3 LK1 Wings
-
- Inside our Factory, Lokefoil developped the Speed wing to reach the maximum top speed, for riders looking for adrenaline.
- This wing allows you to go sailing at high speed in full confidence and stability.
- Program :
- Program : speed, slalom
- Top Speed : 34 Knots and more.
- Specification :
- Dimension : Wing span : 600mm wing chord :125mm
- Area : 450cm²
- Material : Carbon HR.
- Weight : 335gr
- Compatible : Envol (+ adaptater), LK1, LK1 2020, LK1 Performance.
-
- Inside our Factory, Lokefoil developped the Performance wing to gain speed and glide in the widder wind range and keeping essential lift.
- The versatility of this wing allows you to go sailing at high speed for reaching/downwind or upwind.
- Program :
- Program : race, freerace, freeride
- Top Speed : 29Knots
- Specification :
- Dimension : wing span : 880mm wing chord :125mm
- Area : 800cm²
- Matériaux : Carbon HR.
- Weight : 715gr
- Compatible : Envol (+ adaptater), LK1, LK1 2020, LK1 Performance.
-
- Inside our Factory, Lokefoil developped the Freeride wing to sail in the lightest wind with amazing facilities.
- This wing allows you to fly easily at really low speed , in holes or for manoeuver.
- Program :
- Program : freeride, freestyle
- Top Speed : 25Knots
- Specification :
- Dimension : wing span : 900mm wing chord :170mm
- Area : 1321cm²
- Material : Carbon HR.
- Weight : 850gr
- Compatible : Envol (+ adaptater), LK1, LK1 2020, LK1 Performance.
3 LK1 stabilizer
-
- Inside our Factory, Lokefoil developped this Stabilizer to Sail in the lightest breeze.
- His big area allows to sail easily at low speed
- Program :
- Program : freeride, freerace
- Setting : shim 1 et 2.
- Specification :
- Dimension : Wing span : 540mm wing chord :90mm
- Area : 450cm²
- Material : Carbon HR .
- Weight : 255gr
- Compatible : LK1, LK1 2020, LK1 Performance.
-
- Inside our Factory, Lokefoil developped this Stabilizer to Sail in every conditions.
- His design avoid the risk of cut and makes it strong.
- Program :
- Program : freeride, freerace
- Setting : shim 1 and 2.
- Specification :
- Dimension : wing span : 480mm wing chord :90mm
- Area : 300cm²
- Material : Carbon HR.
- Weight : 205gr
- Compatible : LK1, LK1 2020, LK1 Performance.
-
- Inside our Factory, Lokefoil developped this Stabilizer to gain speed une the widder wind range.
- The versatility of this stabilizer allows you to go sailing at high speed for reaching/downwind or upwind.
- Program :
- Program : race, freerace, freeride
- Setting : shim 1 et 2.
- Specification :
- Dimension : wing span : 450mm wing chord :90mm
- Area : 250cm²
- Material : Carbon HR.
- Weight : 145gr
- Compatible : LK1, LK1 2020, LK1 Performance.
